Measurement Sensors and Control Devices
Measurement Sensors and Control Devices collect information and communicate it to a network to control equipment or monitor building systems. Examples include occupant sensors that turn lights off when occupants are not present, automatic lighting controls that adjust lighting levels when enough daylight is present to light the space, and carbon dioxide (CO2) sensors that monitor CO2 levels in an enclosed space and adjust ventilation rates to maintain indoor air quality. These sensors and controls can be integrated into a centralized building automation system (BAS) to enable energy management across building systems (HVAC, Lighting, IEQ) and “smart” operations at the whole-building level.Procure Products
in the Green Procurement Compilation13 Results : CO2 Sensors
-
Net Zero Energy Building Examples - GSA Sustainable Facilities Tool
...cooling loads, natural ventilation. CO2 sensors to match the amount of ventilation...desk mounted individual occupancy sensors. Renewable energy: Renewable energyhttps://sftool.gov › plan › 422 › net-energy-building-examples -
Building Systems Upgrades - GSA Sustainable Facilities Tool
...energy performance Install occupancy sensors to control dedicated power receptacles...daylight photo-sensors, dimming electronic ballasts, occupancy sensors and automatichttps://sftool.gov › plan › 267 › building-systems-upgrades -
Operational Carbon - GSA Sustainable Facilities Tool
Buildings EMIS Primer Second Edition Sensors and Controls Building Automation Systems:...Overview page. NREL HVAC Resource Map: Sensors and Controls Deep energy retrofitshttps://sftool.gov › learn › about › 659 › operational-carbon -
Enhancing Health with Indoor Air - GSA Sustainable Facilities Tool
Minimum Ventilation Rate (@200SF/Person) CO2 Steady State* Conventional: ASHRAE 62...relation between ventilation and CO2 is not linear. As CO2 goes down, the same amounthttps://sftool.gov › learn › about › 626 › enhancing-health-indoor-air -
Building Operations and Maintenance Services - GSA Sustainable Facilities Tool
...reporting value (MERV) of 13 Install CO2 sensors in densely populated areas to monitor...use, temperature, relative humidity, CO2 concentrations, and light levels throughhttps://sftool.gov › plan › 268 › building-operations-maintenance-services -
System Bundling > IEQ - GSA Sustainable Facilities Tool
System Level Metering, Measurement Sensors and Control Devices, Thermal Controls...occupants to report malfunctioning sensors, controls, and other issues so correctivehttps://sftool.gov › explore › green-building › section › 33 › ieq › system-bundling -
Grid-Interactive Efficient Buildings - GSA Sustainable Facilities Tool
...in energy storage, communications, sensors and controls; Clean energy and climate...improve comfort, health, and productivity CO2 savings Assumes GEBs are applied acrosshttps://sftool.gov › learn › about › 638 › grid-interactive-efficient-buildings -
PowerPoint Presentation
Healthy Space: CO2 Levels Post-Occupancy Study CO2, O3 Sensors CO2 BY TIME © 2016https://sftool.gov › Content › attachments › Iswg › iswg-policies-strategies › ISWG_ASID HQ Presentation_10-2017.pdf -
PowerPoint Presentation
Healthy Space: CO2 Levels Post-Occupancy Study CO2, O3 Sensors CO2 BY TIME © 2016https://sftool.gov › Content › attachments › Iswg › iswg-case-studies › ISWG_ASID HQ Presentation_10-2017.pdf -
GSA Impact Study_ISWGpost.pdf
...higher occupant sa;sfac;on 33% fewer CO2 emissions Does Sustainable Design Deliver...higher occupant sa;sfac;on 36% fewer CO2 emissions Does Sustainable Design Deliverhttps://sftool.gov › Content › attachments › Iswg › iswg-case-studies › GSA Impact Study_ISWGpost.pdf -
Building Certification Standards Crosswalk - GSA Sustainable Facilities Tool
Maintains Outdoor Air I2.3 Air Quality Sensors I2.5 CO Monitoring in Occupied Spaces...Maintains Outdoor Air I2.3 Air Quality Sensors I2.5 CO Monitoring in Occupied Spaceshttps://sftool.gov › learn › GRScrosswalk -
A Temperature and Seasonal Energy Analysis of Green, White and Dark Roofs
Figure 2: Photograph of control roof sensors ....................................September to early October 2008. All sensors are operational and are recordinghttps://sftool.gov › Content › attachments › Columbia_A_Temperature_ and_Seasonal_Energy_Analysis.pdf -
Interim Report on Evaluation of GSA Total Estimated Cost Impact (TECI) Metrics Center for Building Performance and Diagnostics Carnegie Mellon University May 31, 2019
...data) 2. Building Automation data (BAS sensor and controller settings for equipment...Temperature Out of Range Pump Cycling Sensor Failure Sensor Out of Range Terminal Unithttps://sftool.gov › Content › attachments › Iswg › iswg-case-studies › GSA CMU TECI ISWG October 2020.pdf
Page 1
Powered by Search.gov