[Skip to Content]

Health & Wellness Guidance Crosswalk

Meet Federal requirements and establish operational health and wellness goals by exploring how the Federal Guiding Principles for Sustainable Federal Buildings relate to standards, guidelines, and building rating systems. Choose the criteria that best suit your project to promote health and wellness as optimally as possible.

Search
ASHRAE 189.1 (2020)opens in new window DoD UFC 1-200-02 (Dec 2020)opens in new window Fitwel v2.1opens in new window Green Globes EB (2023) and NC (2021)opens in new window GSA PBS-P100 (2024)opens in new window LEED v4.1opens in new window WELL v2opens in new window
i:8 gp:13
Air Quality and Control of Temperature
GP IV. Enhance the Indoor Environment: Ventilation and Thermal Comfort

NC&M Criteria 4.1; EB Criteria 4.1

ASHRAE 189.1 (2020) checked

Chapter 8

8.3.1.1 Ventilation: Healthcare facilities - must comply with ASHRAE Standard 170; ASHRAE Standard 62.1 sections 6.1.1 and 6.2 must be used to determine minimum zone and intake outdoor airflow rates

8.3.2 Thermal Environmental Conditions for Human Occupancy:  Must comply with ASHRAE 55 section 6.1 and 6.2

DoD UFC 1-200-02 (Dec 2020) checked

New Construction
Section 2-5 Enhance Indoor Environmental Quality [2-5.1 Ventilation and Thermal Comfort]

Existing Buildings
Section 3-5 Enhance Indoor Environmental Quality [3-5.1 Ventilation and Thermal Comfort]

Fitwel v2.1 checked
Workplace Scorecards

Indoor Environments
  6.1 Tobacco- and Smoke-Free Environment
  6.2 Asbestos-Safe Property
  6.3 Indoor Air Quality (IAQ) Policy
  6.4 Indoor Air Quality (IAQ) Testing
  6.5 Indoor Air Quality (IAQ) Testing Results
  6.6 Green Purchasing Policy
  6.7 Chemical Storage Ventilation
  6.8 Integrated Pest Management

Workspaces
  7.5 Thermal Control

Commercial Site Scorecard

Site Composition and Location
  1.8 Project Location

Site Management
  4.2 Integrated Pest Management
  4.3 Green Purchasing Policy

Buildings Design
  5.1 Tobacco- and Smoke-Free Signage
  5.4 Building Design Guidelines
  5.5 Building Operational Guidelines

Environmental Policies and Procedures
  6.2 Heat Island Mitigation
  6.5 Idle Reduction
  6.6 Air Quality
  6.7 Air Quality Testing
  6.8 Air Quality Results

Site Safety
  11.3 Construction Safety
  11.5 Chemical Storage
  11.6 Hazardous Waste Management

Green Globes EB (2023) and NC (2021) checked

New Construction
6.1 Air Ventilation and Quality
6.4 Thermal Comfort

Existing Buildings
6.1 Indoor Air Quality Systems and Measures
6.5 Thermal Comfort

GSA PBS-P100 (2024) checked
3.10.2 Health and Comfort: Environmental Controls
3.10.2.1 Ventilation and Thermal Comfort
5.2 Mechanical Engineering
5.2.1 Temperature
5.2.2 Humidity Control
5.2.3 Air Movement
5.2.4 Pressure
5.2.5 Ventilation
5.2.6 Filtration
LEED v4.1 checked

O+M
Indoor Environmental Quality
  Prerequisite: Minimum Indoor Air Quality
  Credit: Indoor Environmental Quality Performance

BD+C, ID+C
Indoor Environmental Quality
  Prerequisite: Minimum Indoor Air Quality
  Credit: Enhanced Indoor Air Quality Strategies
  Credit: Construction Indoor Air Quality Management Plan
  Credit: Indoor Air Quality Assessment
  Credit: Thermal Comfort
Innovation
  Pilot: Learning Controls for Thermal Comfort (Alternative pathway for Credit: Thermal Comfort)
  Pilot: Performance-based Indoor Air Quality Design and Assessment

Residential BD+C
Indoor Environmental Quality
  Prerequisite: Minimum Indoor Air Quality
  Credit: Enhanced Indoor Air Quality Strategies
Innovation
  Pilot: Learning Controls for Thermal Comfort (Alternative pathway for Credit: Thermal Comfort)

WELL v2 checked

Air Features
A03 Ventilation Design (Precondition)
A06 Enhanced Ventilation Design (Optimization)
A07 Operable Windows (Optimization)
A08 Air Quality Monitoring and Awareness (Optimization)
A12 Air Filtration (Optimization)
A13 Enhanced Supply Air (Optimization)

Thermal Comfort Features
T01 Thermal Performance (Precondition)
T02 Enhanced Thermal Performance (Optimization)
T03 Thermal Zoning (Optimization)
T04 Individual Thermal Control (Optimization)
T05 Radiant Thermal Control (Optimization)
T06 Thermal Comfort Monitoring (Optimization)
T08 Enhanced Operational Windows [βeta] (Optimization)

i:10 gp:15
Air Quality and Exposure to Mold and Mildew
GP IV. Enhance the Indoor Environment: Moisture and Mold Control

NC&M Criteria 4.5; EB Criteria 4.5

ASHRAE 189.1 (2020) checked

Chapter 8

8.3.1.8 Building Entrances: All building entrances shall emply an entryway floor system comprising a scraper surface, an absorption surface, and a finishing surface

8.3.6 Moisture Control:  Either a dynamic heat and moisture analysis, in accordance with ANSI / ASHRAE Standard 160 or steady-state water vapor transmission analysis, in accordance with Sections 8.3.6.1 and 8.3.6.2, shall be performed on above-grade portions of the building envelope and on interior partitions.


Chapter 10

10.3.1.6 Moisture Control

DoD UFC 1-200-02 (Dec 2020) checked

New Construction
Section 2-5 Enhance Indoor Environmental Quality [2-5.3.1 Moisture Control]

Existing Buildings
Section 3-5.3 Indoor Air Quality [3-5.3.1 Moisture Control]

Fitwel v2.1 checked
Workplace Scorecards

Indoor Environments
  6.2 Asbestos-Safe Property
  6.3 Indoor Air Quality (IAQ) Policy
  6.4 Indoor Air Quality (IAQ) Testing

Commercial Site Scorecard

Buildings Design
  5.4 Building Design Guidelines
  5.5 Building Operational Guidelines

Environmental Policies and Procedures
  6.1 Water Management Plan
  6.2 Heat Island Mitigation
  6.6 Air Quality
  6.7 Air Quality Testing

Site Safety
  11.3 Construction Safety
  11.4 Flood Damage Mitigation

Green Globes EB (2023) and NC (2021) checked

New Construction
1.4 Moisture Control Analysis

Existing Buildings
6.2.4 Mold Detection and Abatement

GSA PBS-P100 (2024) checked
3.1.4 Moisture and Condensation Control
3.2.4 Moisture and Condensate Control
3.2.4.1 Moisture Control Opaque Assemblies
3.2.4.2 Condensation Resistance - Fenestration
3.3 Enclosure Requirements
3.3.1 Moisture Control
3.3.4 Wall Systems
3.3.4.2 Materials with Organic Content
3.3.4.3 Air/Moisture Barrier System
LEED v4.1 checked

BD+C, ID+C
Energy and Atmosphere
  Prerequisite: Fundamental Commissioning and Verification
  Credit: Enhanced Commissioning
Indoor Environmental Quality
  Credit: Thermal Comfort

Residential BD+C
Energy and Atmosphere
  Prerequisite: Fundamental Systems Testing and Verification
  Credit: Enhanced Commissioning
Indoor Environmental Quality
  Prerequisite: Interior Moisture Management
  Credit: Thermal Comfort

WELL v2 checked

Air Features
A14 Microbe and Mold Control (Optimization)

Water Features
W07 Moisture Management (Optimization)

Thermal Comfort Features
T07 Humidity Control (Optimization)

i:11 gp:16
Air Quality and Off-Gassing and Exposure to VOCs
GP IV. Enhance the Indoor Environment: Low-Emitting Materials and Products

NC&M Criteria 4.3; EB Criteria 4.3

ASHRAE 189.1 (2020) checked

Chapter 8

8.4.2 Materials: Reported emissions or volatile organic compound (VOC) contents specified in the following subsections shall be from a representative product sample and determined with each product reformulation or at a minimum of every three years

8.5.2 Materials: Emissions of all materials listed below and used within the building shall be modeled for individual VOC concentrations

DoD UFC 1-200-02 (Dec 2020) checked

New Construction
Section 2-5 Enhance Indoor Environmental Quality [2-5.3.2 Reduce Volatile Organic Compounds (VOC)(Low-Emitting Materials)]

Existing Buildings
Section 3-5 Enhance Indoor Environmental Quality [3-5.3.2 Reduce Volatile Organic Compounds (VOC)(Low-Emitting Materials)]

Fitwel v2.1 checked
Workplace Scorecards

Indoor Environments
  6.3 Indoor Air Quality (IAQ) Policy
  6.4 Indoor Air Quality (IAQ) Testing
  6.5 Indoor Air Quality (IAQ) Testing Results
  6.6 Green Purchasing Policy

Commercial Site Scorecard

Site Management
  4.3 Green Purchasing Policy

Buildings Design
  5.4 Building Design Guidelines
  5.5 Building Operational Guidelines

Environmental Policies and Procedures
  6.2 Heat Island Mitigation
  6.5 Idle Reduction
  6.6 Air Quality
  6.7 Air Quality Testing
  6.8 Air Quality Results

Site Safety
  11.3 Construction Safety

Green Globes EB (2023) and NC (2021) checked

New Construction
6.2.1 Volatile Organic Compounds

Existing Buildings
6.1.4.3 Is there a policy and procedure for maintaining the air quality that includes the following components:

  • Using low-emitting products and materials that have conforming VOC content limits and low VOC emissions for maintenance and cycle renovations?
GSA PBS-P100 (2024) checked
3.5 Interior Construction and Interior Finishes Performance Attributes
5.2 Mechanical Performance Attributes
5.2.5 Ventilation: 3 Tiers include low emitting materials requirements
LEED v4.1 checked

BD+C, Residential BD+C, ID+C
Indoor Environmental Quality
  Credit: Low-Emitting Materials

O+M
Indoor Environmental Quality
  Prerequisite: Green Cleaning Policy
  Credit: Indoor Environmental Quality Performance
  Credit: Green Cleaning
Materials and Resources
  Prerequisite: Facility Maintenance and Renovations Policy
  Credit: Purchasing

WELL v2 checked

Air Features
A01 Air Quality Standards (Precondition)
A05 Enhanced Air Quality (Optimization)

Materials Features
X11 Cleaning Products and Protocol (Optimization)
X06 VOC Restrictions (Optimization)

i:6 gp:11
Air Quality and Plants
GP IV. Enhance the Indoor Environment: Occupant Health and Wellness

NC&M Criteria 4.9; EB Criteria 4.9

DoD UFC 1-200-02 (Dec 2020) checked

New Construction
Section 2-5 Enhance Indoor Environmental Quality [2-5.4 Occupant Health and Wellness]

Existing Buildings
Section 3-5 Enhance Indoor Environmental Quality [3-5.4 Occupant Health and Wellness]
Appendix B - Best Practices [B-3.3 Connection to Nature]

Fitwel v2.1 checked
Workplace Scorecards

Outdoor Spaces
  3.1 Outdoor Space Amenities
  3.4 Restorative Garden
  3.6 Fruit and Vegetable Garden

Indoor Environments
  7.2 Views of Nature

Commercial Site Scorecard

Site Composition and Location
  1.7 Open Space Preservation

Outdoor Spaces
  3.1 Outdoor Space Amenities
  3.6 Restorative Garden
  3.7 Fruit and Vegetable Garden
  3.9 Street Trees

Buildings Design
  5.4 Building Design Guidelines
  5.5 Building Operational Guidelines

LEED v4.1 checked

BD+C & ID+C (except Schools, Homes, and Midrise), O+M (except Schools), LEED for Schools, LEED for Homes and Midrise
Innovation
  Pilot: Local Food Production

BD+C, Residential BD+C, ID+C
Innovation
  Pilot: Designing with Nature, Biophilic Design for the Indoor Environment

WELL v2 checked

Air Features
N12 Food Production (Optimization))

Mind Features
M02 Nature and Place (Optimization)

i:12 gp:17
Air Quality in Occupied Buildings under Construction
GP IV. Enhance the Indoor Environment: Indoor Air Quality during Construction and Operations

NC&M Criteria 4.6; EB Criteria 4.6

ASHRAE 189.1 (2020) checked

Chapter 10

10.3.1.5 IAQ Construction Management

10.3.1.7 Construction Activity Pollution Prevention: Idling of Construction Vehicles

10.3.1.8 Construction Activity Pollution Prevention: Protection of Occupied Areas

DoD UFC 1-200-02 (Dec 2020) checked

New Construction
Section 2-5 Enhance Indoor Environmental Quality [2-5.3.3 Protect Indoor Air Quality during Construction]

Existing Buildings
Section 3-5 Enhance Indoor Environmental Quality [3-5.3.3 Protect Indoor Air Quality during Construction]
Appendix B Best Practices [B-2.1 IAQ for Work in Existing Buildings]

Fitwel v2.1 checked
Workplace Scorecards

Indoor Environments
  6.2 Asbestos-Safe Property
  6.3 Indoor Air Quality (IAQ) Policy
  6.4 Indoor Air Quality (IAQ) Testing
  6.5 Indoor Air Quality (IAQ) Testing Results

Commercial Site Scorecard

Buildings Design
  5.4 Building Design Guidelines
  5.5 Building Operational Guidelines

Environmental Policies and Procedures
  6.6 Air Quality
  6.7 Air Quality Testing
  6.8 Air Quality Results

Site Safety
  11.3 Construction Safety

Green Globes EB (2023) and NC (2021) checked

New Construction
6.2 Source Control and Measurement of Indoor Pollutants
6.2.2 Pre-Occupancy Indoor Air Quality Testing

Existing Buildings
6.1.3 Control of Pollutants at Source

LEED v4.1 checked

BD+C, ID+C
Interior Environmental Quality
  Credit: Construction Indoor Air Quality Management
Innovation
  Pilot: Clean Construction
  Pilot: Performance-based Indoor Air Quality Design and Assessment

Residential BD+C
Innovation
  Pilot: Clean Construction

O+M
Materials and Resources
  Prerequisite: Facility Maintenance and Renovations Policy

WELL v2 checked

Air Features
A04 Construction Pollution Management (Precondition)

i:13 gp:18
Chemical Exposure from Pest Management Programs
GP IV. Enhance the Indoor Environment: Integrated Pest Management

NC&M Criteria 4.8; EB Criteria 4.8

DoD UFC 1-200-02 (Dec 2020) checked

New Construction
Section 3-5 Enhance Indoor Environmental Quality [3-5.3.3 Integrated Pest Management]

Fitwel v2.1 checked
Workplace Scorecards

Indoor Environments
  6.6 Green Purchasing Policy
  6.7 Chemical Storage Ventilation
  6.8 Integrated Pest Management

Commercial Site Scorecard

Site Management
  4.2 Integrated Pest Management
  4.3 Green Purchasing Policy

Buildings Design
  5.5 Building Operational Guidelines

Site Safety
  11.3 Construction Safety
  11.5 Chemical Storage
  11.6 Hazardous Waste Management

Green Globes EB (2023) and NC (2021) checked

New Construction
6.2.5 Pest and Contamination Control

Existing Buildings
6.3.2 Integrated Pest Management

GSA PBS-P100 (2024) checked
2.5.8 Operations and Maintenance
2.5.8.1 Sustainable Site Maintenance
LEED v4.1 checked
O+M
Indoor Environmental Quality
  Credit: Integrated Pest Management (IPM)
WELL v2 checked

Materials Features
X10 Pesticide Management and Pesticide Use (Optimization)

i:5 gp:10
Daylight and Circadian Rhythm
GP IV. Enhance the Indoor Environment: Daylighting and Lighting Controls

NC&M Criteria 4.2; EB Criteria 4.2

ASHRAE 189.1 (2020) checked

Chapter 8

8.3.8 Occupant Override

8.4.1 Daylighting

8.5.1 Daylight Simulation

DoD UFC 1-200-02 (Dec 2020) checked

New Construction
Section 2-5 Enhance Indoor Environmental Quality [2-5.2 Daylighting and Lighting Controls]

Existing Buildings
Section 2-5 Enhance Indoor Environmental Quality [3-5.2 Daylighting and Lighting Controls]
Appendix C: Projects Impacting a Historic Building or District [C-1.4 Daylighting]

Fitwel v2.1 checked
Workplace Scorecards

Outdoor Spaces
  3.1 Outdoor Space Amenities
  3.4 Restorative Garden

Workspaces
  7.1 Access to Daylight
  7.2 Views of Nature

Commercial Site Scorecard

Outdoor Spaces
  3.1 Outdoor Space Amenities
  3.6 Restorative Garden

Buildings Design
  5.4 Building Design Guidelines

Environmental Policies and Procedures
  6.3 Light Pollution Mitigation

Green Globes EB (2023) and NC (2021) checked

New Construction
6.3.1 Daylighting and Views

Existing Buildings
6.4.1 Daylighting and Electrical Lighting

GSA PBS-P100 (2024) checked
3.10.2 Health and Comfort: Environmental Controls
3.10.2.2 Lighting/Daylighting
6.1 Lighting Performance Requirements
6.1.1 Lighting Quality - Interior
6.2 Lighting Performance Attributes
6.2.1 Lighting Quality
LEED v4.1 checked
Residential BD+C
Indoor Environmental Quality
  Credit: Daylight
Innovation
  Pilot: Daylight in nonregularly occupied spaces
WELL v2 checked

Light Features
L01 Light Exposure (Precondition)
L03 Circadian Lighting Design (Optimization)
L04 Electric Light Glare Control (Optimization)
L05 Daylight Design Strategies (Optimization)
L06 Daylight Simulation (Optimization)

i:2 gp:2
Diet
GP IV. Enhance the Indoor Environment: Occupant Health and Wellness (Healthy Dining Options)

NC&M Criteria 4.9; EB Criteria 4.9

DoD UFC 1-200-02 (Dec 2020) checked

New Construction
Section 2-5 Enhance Indoor Environmental Quality [2-5.4 Occupant Health and Wellness]

Existing Buildings
Section 3-5 Enhance Indoor Environmental Quality [3-5.4 Occupant Health and Wellness]

Fitwel v2.1 checked
Workplace Scorecards

Outdoor Spaces
  3.5 Farmers Market
  3.6 Crop Share Drop-Off

Cafeterias and Prepared Food Retail
  10.1 Healthy Food and Beverage Policy for Prepared Food Areas
  10.2 Choice Architecture Practices
  10.3 Pricing Incentives

Vending Machines and Snack Bars
  11.1 Healthy Food and Beverage Policy for Vending Machines and Snack Bars
  11.2 Choice Architecture Practices for Vending Machines and Snack Bars
  11.3 Pricing Incentives for Vending Machines and Snack Bars

Commercial Site Scorecard

Healthy Food Access
  10.1 Healthy Food and Beverage Policy
  10.2 Healthy Food and Beverage Practices
  10.3 Farmers Market
  10.4 Crop Share Drop-Off
  10.5 Healthy Vending Machine and Snack Bar Policy
  10.6 Healthy Vending Machine & Snack Bar Practices

LEED v4.1 checked
BD+C & ID+C (except Schools, Homes, and Midrise), O+M (except Schools), LEED for Schools, LEED for Homes and Midrise
Innovation
  Pilot: Local Food Production
WELL v2 checked

Nourishment Features
N01 Fruits and Vegetables (Precondition)
N02 Nutritional Transparency (Precondition)
N03 Refined Ingredients (Optimization)
N04 Food Advertising (Optimization)
N05 Artificial Ingredients (Optimization)
N06 Portion Sizes (Optimization)
N07 Nutrition Education (Optimization)
N08 Mindful Eating (Optimization)
N09 Special Diets (Optimization)
N10 Food Preparation (Optimization)
N11 Responsible Food Sourcing (Optimization)
N12 Food Production (Optimization)
N13 Local Food Environment (Optimization)
N14 [βeta] Red and Processed Meats (Optimization)

i:2 gp:3
Diet
GP IV. Enhance the Indoor Environment: Occupant Health and Wellness (Potable Water)

NC&M Criteria 4.9; EB Criteria 4.9

Fitwel v2.1 checked
Workplace Scorecards

Water Supply
  9.1 Universally Accessible Water Supply
  9.2 Water Bottle Refilling Station
  9.3 Water Quality

Cafeterias and Prepared Food Retail
  10.4 Water Access

Vending Machines and Snack Bars
  11.4 Water Access

Commercial Site Scorecard

Water Access
  9.1 Universally Accessible Water Supply
  9.2 Water Bottle Refilling Station
  9.3 Water Quality

Green Globes EB (2023) and NC (2021) checked

Existing Buildings
6.7.1 Access to Potable Water
6.7.2.3.4 Provides access to free sources of drinking water

LEED v4.1 checked

BD+C, ID+C
Innovation
  Pilot: Lead Risk Reduction
  Pilot: PBT Source Reduction - Lead, Cadmium and Copper

O+M, Residential BD+C
Innovation
  Pilot: Lead Risk Reduction

WELL v2 checked

Water Features
W01 Water Quality Indicators (Precondition)
W02 Drinking Water Quality (Precondition)
W03 Basic Water Management (Precondition)
W04 Enhanced Water Quality (Optimization)
W05 Drinking Water Quality Management (Optimization)
W06 Drinking Water Promotion (Optimization)

i:3 gp:4
Exercise
GP IV. Enhance the Indoor Environment: Occupant Health and Wellness (Stairwell Vertical Circulation)

NC&M Criteria 4.9; EB Criteria 4.9

DoD UFC 1-200-02 (Dec 2020) checked

New Construction
Section 2-5 Enhance Indoor Environmental Quality [2-5.4 Occupant Health and Wellness]

Existing Buildings
Section 3-5 Enhance Indoor Environmental Quality [3-5.4 Occupant Health and Wellness]
Appendix B: Best Practices [B-3.2 Promoting Voluntary Physical Activity]

Fitwel v2.1 checked
Workplace Scorecards

Stairs
  5.1 Stair Access
  5.2 Stair Location
  5.3 Stair Design
  5.4 Stair Signage
  5.5 Stair Visibility
  5.6 Stair Safety

Commercial Site Scorecard

Buildings Design
  5.4 Buildings Design Guidelines

GSA PBS-P100 (2024) checked
3.4.3 Promote the Use of Stairs
LEED v4.1 checked
BD+C, ID+C, O+M, Residential BD+C
Innovation
  Pilot: Design for Active Occupants
WELL v2 checked

Movement Features
V01 Active Buildings and Communities (Precondition)
V03 Circulation Network (Optimization)

i:3 gp:5
Exercise
GP IV. Enhance the Indoor Environment: Occupant Health and Wellness (Active Workstations)

NC&M Criteria 4.9; EB Criteria 4.9

DoD UFC 1-200-02 (Dec 2020) checked

New Construction
Section 2-5 Enhance Indoor Environmental Quality [2-5.4 Occupant Health and Wellness]

Existing Buildings
Section 3-5 Enhance Indoor Environmental Quality [3-5.4 Occupant Health and Wellness]
Appendix B: Best Practices [B-3.1 Sit-Stand Workstations]

Fitwel v2.1 checked
Workplace Scorecards

Workspaces
  7.4 Active Workstations

LEED v4.1 checked
BD+C, ID+C, O+M, Residential BD+C
Innovation
  Pilot: Ergonomics approach for computer users.
WELL v2 checked

Movement Features
V02 Ergonomic Workstation Design (Precondition)
V07 Active Furnishings (Optimization)
V11 [Beta] Ergonomics Programming (Optimization)

i:3 gp:7
Exercise
GP IV. Enhance the Indoor Environment: Occupant Health and Wellness (Access to Bicycle Commuter Facilities)

NC&M Criteria 4.9; EB Criteria 4.9

ASHRAE 189.1 (2020) checked

Chapter 5

5.3.7.1.2 Bicycle Paths

5.3.7.2 Bicycle Parking

DoD UFC 1-200-02 (Dec 2020) checked

New Construction
Section 2-5 Enhance Indoor Environmental Quality [2-5.4 Occupant Health and Wellness]

Existing Buildings
Section 3-5 Enhance Indoor Environmental Quality [3-5.4 Occupant Health and Wellness]
Appendix B: Best Practices [B-3.2 Promoting Voluntary Physical Activity]

Fitwel v2.1 checked
Workplace Scorecards

Building Access
  2.3 Bicycle Parking
  2.4 Active Commuter Showers

Commercial Site Scorecard

Access
  2.3 Bike Lanes
  2.5 Bicycle Parking

Green Globes EB (2023) and NC (2021) checked

New Construction
2.2.1.5 Is a bicycle parking rack located within 50ft of an entrance?
2.2.1.6.1 Is sheltered bicycle parking provided?
2.2.1.6.2 Are at least 50% of sheltered bicycle parking located inside building or within storage lockers or another area that provides security of a locked room or cage?

Existing Buildings
2.2.2.5 Providing bicycle facilities for min 5% of occupants

LEED v4.1 checked

BD+C NC, Residential BD+C, ID+C
Location and Transportation
  Credit: Bicycle Facilities
Transportation and Land Use
  Credit: Access to Quality Transit

LEED for Communities, LEED for Cities
Transportation and Land Use
  Credit: Access to Quality Transit
  Credit: Smart Mobility and Transportation Policy
  Credit: Walkability and Bikeability

O+M
Location and Transportation
  Credit: Transportation Performance

WELL v2 checked

Movement Features
V04 Facilities for Active Occupants (Optimization)

i:3 gp:8
Exercise
GP I. Employ Integrated Design Principles: Integrated Design and Management (Mass Transit/Public Transportation Access & Walkability)

NC&M Criteria 1.1; EB Criteria 1.1

ASHRAE 189.1 (2020) checked

Chapter 5

5.3.7 Mitigation of Transportation Impacts

DoD UFC 1-200-02 (Dec 2020) checked

New Construction
Section 2-2 Employ Integrated Design Principles [2-2.1.4 Site Integration and Design of Building]

Fitwel v2.1 checked
Workplace Scorecards

Location
  1.1 - 1.3 Walkability
  1.4 Proximity to Transit

Building Access
  2.1 Pedestrian Route to Transit
  2.2 Commuter Survey
  2.3 Bicycle Parking
  2.4 Active Commuter Shower
  2.5 Incentivizing Transit
  2.6 Efficiency Parking

Entrances and Ground Floor
  4.2 Main Pedestrian Entrance
  4.3 Main Entrance Amenities
  4.5 Publicly Accessible Use
  4.6 Activate Pedestrian Areas
  4.7 Local Amenities Display

Commercial Site Scorecard

Site Composition and Location
  1.1 Transit Access
  1.2 Community Destinations
  1.3 Pedestrian Network
  1.4 Efficient Parking
  1.5 Brownfield Remediation
  1.6 Infill Development
  1.7 Open Space Preservation
  1.8 Project Location

Site Access
  2.1 Universal Accessibility
  2.2 Transit Stops
  2.3 Bicycle Lanes
  2.4 Commuter Survey
  2.5 Bicycle Parking
  2.6 Wayfinding

Buildings Design
  5.4 Building Design Guidelines

Green Globes EB (2023) and NC (2021) checked

New Construction
2.2.1 Transportation

Existing Buildings
2.2.2.2 What is the distance along public sidewalks and bike lanes/paths to the closest public transit stop?
2.2.2.4 Is there a public or private transit service within 0.5 miles for building users at reduced cost?
2.2.2.6 Have other measures been enacted to reduce car dependency?

GSA PBS-P100 (2024) checked
2.1 Community Planning Performance Table
2.1.1 Sustainable Locations
2.2.1 Sustainable Locations
LEED v4.1 checked

BD+C, Residential BD+C, ID+C
Location and Transportation
  Credit: Bicycle Facilities
Transportation and Land Use
  Credit: Access to Quality Transit

LEED for Communities, LEED for Cities
Transportation and Land Use
  Credit: Access to Quality Transit
  Credit: Smart Mobility and Transportation Policy
  Credit: Walkability and Bikeability

O+M
Location and Transportation
  Credit: Transportation Performance

WELL v2 checked

Movement Features
V01 Active Buildings and Communities (Precondition)
V05 Site Planning and Selection (Optimization)

i:9 gp:14
Exposure to Radon
GP IV. Enhance the Indoor Environment: Radon Mitigation

NC&M Criteria 4.4; EB Criteria 4.4

ASHRAE 189.1 (2020) checked

Chapter 8

8.3.4 Soil-Gas Control: Soil-gas entry into enclosed spaces that are immediately above crawlspaces, slabs-on-grade, and basement slabs shall be controlled in accordance with sections 8.3.4.1 or 8.3.4.2

Chapter 10

10.3.1.9 Soil-Gas Control: The building shall be tested, postconstruction, for radon in accordance with ANSI/AARST MALB. The indoor radon concentration shall be below 2.7 pCi/L

Green Globes EB (2023) and NC (2021) checked

New Construction
6.2.6 Other Indoor Pollutants (Tobacco, Radon)

Existing Buildings
6.2.2 Radon

GSA PBS-P100 (2024) checked
3.3.3 Substructure: depressurization required when radon is present
LEED v4.1 checked
Residential BD+C
Indoor Environmental Quality
  Prerequisite: Radon-Resistant Construction
WELL v2 checked

Air Features
A01 Fundamental Air Quality (Precondition)

i:1 gp:1
General Health & Wellness
GP I. Employ Integrated Design Principles: Integrated Design and Management (Integrated team approach)

NC&M Criteria 1.1; EB Criteria 1.1

ASHRAE 189.1 (2020) checked

Informative Appendix F: Integrated Design

DoD UFC 1-200-02 (Dec 2020) checked

New Construction
Section 2-2 Employ Integrated Design Principles [2-2.1.4 Site Integration and Design of Building]

Existing Buildings
Section 3-2 Employ Integrated Assessment, Operation, and Management Principles [3-2.1 Integrated Assessment, Operation, and Management]

Fitwel v2.1 checked
Workplace Scorecards

Shared Spaces
  8.12 Occupant Satisfaction Survey
  8.13 Stakeholder Collaboration Process

Commercial Site Scorecard

Community Relations
  7.2 Employment Practices
  7.3 Stakeholder Collaboration Process

Shared Site Amenities
  8.3 Occupant Satisfaction Survey

Green Globes EB (2023) and NC (2021) checked

New Construction
1.1.2 Integrated Design Process

Existing Buildings
1.1.1 Environmental Management System documentation

GSA PBS-P100 (2024) checked

1.9.3 Sustainability Requirements

LEED v4.1 checked

BD+C, ID+C
  Credit: Integrative Process

Residential BD+C
  Credit: Integrative Process

BD+C, ID+C, O+M
Innovation
  Pilot: Integrative Process for Health Promotion

O+M
Innovation
  Pilot: Integrative Process

WELL v2 checked

Community Features
C02 Integrative Design (Precondition)

i:14 gp:19
Potential Exposure and Risk to Occupants
GP V. Reduce the Environmental Impact of Materials: Products

NC&M Criteria 5.3; EB Criteria 5.3

ASHRAE 189.1 (2020) checked

Chapter 9

9.4.1 Reduced impact Materials

9.5.1 Life-Cycle Assessment (LCA)

DoD UFC 1-200-02 (Dec 2020) checked

New Construction
Section 2-6 Reduce Environmental Impact of Materials [2-6.1 Environmentally Preferable Products]

Existing Buildings
Section 3-6 Reduce Environmental Impact of Materials [3-6.1 Environmentally Preferable Products]
Appendix B: Best Practices [B-5 Other Sustainable Products]

Fitwel v2.1 checked
Workplace Scorecards

Indoor Environments
  6.3 Indoor Air Quality Policy
  6.4 Indoor Air Quality Testing
  6.5 Indoor Air Quality Testing Results
  6.6 Green Purchasing Policy
  6.7 Chemical Storage Ventilation

Entrances and Ground Floor
  4.8 Entryway Systems

Commercial Site Scorecard

Site Management
  4.3 Green Purchasing Policy

Buildings Design
  5.5 Building Operational Guidelines

Green Globes EB (2023) and NC (2021) checked

Existing Buildings
5.1.2 Environmental Purchasing

GSA PBS-P100 (2024) checked
3.5 Interior Construction Performance Table [many specific materials requirements by building component (recycled, biobased, etc.), too numerous to list]
3.6 Interior Construction Performance Attributes
LEED v4.1 checked

BD+C, ID+C
Materials and Resources
  Credit: Building Product Disclosure and Optimization - Environmental Product Declarations
  Credit: Building Product Disclosure and Optimization - Raw Materials
  Credit: Building Product Disclosure and Optimization - Material Ingredients
Innovation
  Pilot: Integrative Analysis of Building Materials
  Pilot: Building Material Human Hazard & Exposure
Assessment
  Pilot: Certified Multi-attribute Products and Materials
  Pilot: Timber Traceability

Residential BD+C
Materials and Resources
  Credit: Environmentally Preferable Materials
Innovation
  Pilot: Legal Wood
  Pilot: Building Material Human Hazard & Exposure Assessment
  Pilot: Timber Traceability

O+M
Materials and Resources
  Prerequisite: Purchasing Policy
  Credit: Purchasing

WELL v2 checked

Materials Features
X06 VOC Restrictions (Optimization)
X07 Materials Transparency (Optimization)
X08 Materials Optimization (Optimization)
X11 Cleaning Products and Protocols (Optimization)

i:4 gp:9
Smoking Reduction / Cessation
GP IV. Enhance the Indoor Environment: Environmental Smoking Control

NC&M Criteria 4.7; EB Criteria 4.7

ASHRAE 189.1 (2020) checked

Chapter 8

8.3.1.7 Environmental Tobacco Smoke

DoD UFC 1-200-02 (Dec 2020) checked

New Construction
Section 2-5 Enhance Indoor Environmental Quality [2-5.3.4 Environmental Tobacco Smoke Control]

Existing Buildings
Section 3-5 Enhance Indoor Environmental Quality [3-5.3.4 Environmental Tobacco Smoke Control]

Fitwel v2.1 checked
Workplace Scorecards

Outdoor Spaces
  3.8 Tobacco- and Smoke-Free Outdoor Spaces

Entrances and Ground Floor
  4.1 Tobacco- and Smoke-Free Signage

Indoor Environment
  6.1 Tobacco- and Smoke-Free Environment

Commercial Site Scorecards

Outdoor Spaces
  3.8 Tobacco- and Smoke-Free Outdoor Spaces

Buildings Designs
  5.1 Tobacco- and Smoke-Free Signage
  5.5 Building Operational Guidelines

Green Globes EB (2023) and NC (2021) checked

New Construction
6.2.6 Other Indoor Pollutants (Tobacco, Radon)

Existing Buildings
6.1.3 Control of Pollutants at Source

LEED v4.1 checked

BD+C, ID+C, O+M
Indoor Environmental Quality
  Prerequisite: Environmental Tobacco Smoke Control

Residential BD+C Indoor Environmental Quality
  Prerequisite: Environmental Tobacco Smoke Control
  Credit: No Environmental Tobacco Smoke

WELL v2 checked

Air Features
A02 Smoke-Free Environment (Precondition)

Mind Features
M10 Tobacco Cessation (Optimization)

i:7 gp:12
Views of Nature
GP IV. Enhance the Indoor Environment: Occupant Health and Wellness

NC&M Criteria 4.9; EB Criteria 4.9

DoD UFC 1-200-02 (Dec 2020) checked

Appendix B: Best Practices [B-3.3 Connection to Nature]

Fitwel v2.1 checked
Workplace Scorecards

Workspaces
  7.2 Views of Nature

Commercial Site Scorecard

Outdoor Spaces
  3.9 Street Trees

Buildings Design
  5.4 Building Design Guidelines

GSA PBS-P100 (2024) checked
1.9.1.4 Fenestration
1.9.2.4 Designing for Daylight
6.2.1 Lighting Quality
LEED v4.1 checked

BD+C, ID+C
Indoor Environmental Quality
  Credit: Quality Views
Innovation
  Pilot: Designing with Nature, Biophilic Design for the Indoor Environment

Residential BD+C
Indoor Environmental Quality
  Credit: Daylight and Quality Views
Innovation
  Pilot: Designing with Nature, Biophilic Design for the Indoor Environment
  Pilot: Quality Views in Nonregularly Occupied Spaces

 

WELL v2 checked

Mind Features
M02 Nature and Place (Precondition)

Air Quality and Control of Temperature
GP IV. Enhance the Indoor Environment: Ventilation and Thermal Comfort

NC&M Criteria 4.1; EB Criteria 4.1

ASHRAE 189.1 (2020)

Chapter 8

8.3.1.1 Ventilation: Healthcare facilities - must comply with ASHRAE Standard 170; ASHRAE Standard 62.1 sections 6.1.1 and 6.2 must be used to determine minimum zone and intake outdoor airflow rates

8.3.2 Thermal Environmental Conditions for Human Occupancy:  Must comply with ASHRAE 55 section 6.1 and 6.2

DoD UFC 1-200-02 (Dec 2020)

New Construction
Section 2-5 Enhance Indoor Environmental Quality [2-5.1 Ventilation and Thermal Comfort]

Existing Buildings
Section 3-5 Enhance Indoor Environmental Quality [3-5.1 Ventilation and Thermal Comfort]

Fitwel v2.1
Workplace Scorecards

Indoor Environments
  6.1 Tobacco- and Smoke-Free Environment
  6.2 Asbestos-Safe Property
  6.3 Indoor Air Quality (IAQ) Policy
  6.4 Indoor Air Quality (IAQ) Testing
  6.5 Indoor Air Quality (IAQ) Testing Results
  6.6 Green Purchasing Policy
  6.7 Chemical Storage Ventilation
  6.8 Integrated Pest Management

Workspaces
  7.5 Thermal Control

Commercial Site Scorecard

Site Composition and Location
  1.8 Project Location

Site Management
  4.2 Integrated Pest Management
  4.3 Green Purchasing Policy

Buildings Design
  5.1 Tobacco- and Smoke-Free Signage
  5.4 Building Design Guidelines
  5.5 Building Operational Guidelines

Environmental Policies and Procedures
  6.2 Heat Island Mitigation
  6.5 Idle Reduction
  6.6 Air Quality
  6.7 Air Quality Testing
  6.8 Air Quality Results

Site Safety
  11.3 Construction Safety
  11.5 Chemical Storage
  11.6 Hazardous Waste Management

Green Globes EB (2023) and NC (2021)

New Construction
6.1 Air Ventilation and Quality
6.4 Thermal Comfort

Existing Buildings
6.1 Indoor Air Quality Systems and Measures
6.5 Thermal Comfort

GSA PBS-P100 (2024)
3.10.2 Health and Comfort: Environmental Controls
3.10.2.1 Ventilation and Thermal Comfort
5.2 Mechanical Engineering
5.2.1 Temperature
5.2.2 Humidity Control
5.2.3 Air Movement
5.2.4 Pressure
5.2.5 Ventilation
5.2.6 Filtration
LEED v4.1

O+M
Indoor Environmental Quality
  Prerequisite: Minimum Indoor Air Quality
  Credit: Indoor Environmental Quality Performance

BD+C, ID+C
Indoor Environmental Quality
  Prerequisite: Minimum Indoor Air Quality
  Credit: Enhanced Indoor Air Quality Strategies
  Credit: Construction Indoor Air Quality Management Plan
  Credit: Indoor Air Quality Assessment
  Credit: Thermal Comfort
Innovation
  Pilot: Learning Controls for Thermal Comfort (Alternative pathway for Credit: Thermal Comfort)
  Pilot: Performance-based Indoor Air Quality Design and Assessment

Residential BD+C
Indoor Environmental Quality
  Prerequisite: Minimum Indoor Air Quality
  Credit: Enhanced Indoor Air Quality Strategies
Innovation
  Pilot: Learning Controls for Thermal Comfort (Alternative pathway for Credit: Thermal Comfort)

WELL v2

Air Features
A03 Ventilation Design (Precondition)
A06 Enhanced Ventilation Design (Optimization)
A07 Operable Windows (Optimization)
A08 Air Quality Monitoring and Awareness (Optimization)
A12 Air Filtration (Optimization)
A13 Enhanced Supply Air (Optimization)

Thermal Comfort Features
T01 Thermal Performance (Precondition)
T02 Enhanced Thermal Performance (Optimization)
T03 Thermal Zoning (Optimization)
T04 Individual Thermal Control (Optimization)
T05 Radiant Thermal Control (Optimization)
T06 Thermal Comfort Monitoring (Optimization)
T08 Enhanced Operational Windows [βeta] (Optimization)

Air Quality and Exposure to Mold and Mildew
GP IV. Enhance the Indoor Environment: Moisture and Mold Control

NC&M Criteria 4.5; EB Criteria 4.5

ASHRAE 189.1 (2020)

Chapter 8

8.3.1.8 Building Entrances: All building entrances shall emply an entryway floor system comprising a scraper surface, an absorption surface, and a finishing surface

8.3.6 Moisture Control:  Either a dynamic heat and moisture analysis, in accordance with ANSI / ASHRAE Standard 160 or steady-state water vapor transmission analysis, in accordance with Sections 8.3.6.1 and 8.3.6.2, shall be performed on above-grade portions of the building envelope and on interior partitions.


Chapter 10

10.3.1.6 Moisture Control

DoD UFC 1-200-02 (Dec 2020)

New Construction
Section 2-5 Enhance Indoor Environmental Quality [2-5.3.1 Moisture Control]

Existing Buildings
Section 3-5.3 Indoor Air Quality [3-5.3.1 Moisture Control]

Fitwel v2.1
Workplace Scorecards

Indoor Environments
  6.2 Asbestos-Safe Property
  6.3 Indoor Air Quality (IAQ) Policy
  6.4 Indoor Air Quality (IAQ) Testing

Commercial Site Scorecard

Buildings Design
  5.4 Building Design Guidelines
  5.5 Building Operational Guidelines

Environmental Policies and Procedures
  6.1 Water Management Plan
  6.2 Heat Island Mitigation
  6.6 Air Quality
  6.7 Air Quality Testing

Site Safety
  11.3 Construction Safety
  11.4 Flood Damage Mitigation

Green Globes EB (2023) and NC (2021)

New Construction
1.4 Moisture Control Analysis

Existing Buildings
6.2.4 Mold Detection and Abatement

GSA PBS-P100 (2024)
3.1.4 Moisture and Condensation Control
3.2.4 Moisture and Condensate Control
3.2.4.1 Moisture Control Opaque Assemblies
3.2.4.2 Condensation Resistance - Fenestration
3.3 Enclosure Requirements
3.3.1 Moisture Control
3.3.4 Wall Systems
3.3.4.2 Materials with Organic Content
3.3.4.3 Air/Moisture Barrier System
LEED v4.1

BD+C, ID+C
Energy and Atmosphere
  Prerequisite: Fundamental Commissioning and Verification
  Credit: Enhanced Commissioning
Indoor Environmental Quality
  Credit: Thermal Comfort

Residential BD+C
Energy and Atmosphere
  Prerequisite: Fundamental Systems Testing and Verification
  Credit: Enhanced Commissioning
Indoor Environmental Quality
  Prerequisite: Interior Moisture Management
  Credit: Thermal Comfort

WELL v2

Air Features
A14 Microbe and Mold Control (Optimization)

Water Features
W07 Moisture Management (Optimization)

Thermal Comfort Features
T07 Humidity Control (Optimization)

Air Quality and Off-Gassing and Exposure to VOCs
GP IV. Enhance the Indoor Environment: Low-Emitting Materials and Products

NC&M Criteria 4.3; EB Criteria 4.3

ASHRAE 189.1 (2020)

Chapter 8

8.4.2 Materials: Reported emissions or volatile organic compound (VOC) contents specified in the following subsections shall be from a representative product sample and determined with each product reformulation or at a minimum of every three years

8.5.2 Materials: Emissions of all materials listed below and used within the building shall be modeled for individual VOC concentrations

DoD UFC 1-200-02 (Dec 2020)

New Construction
Section 2-5 Enhance Indoor Environmental Quality [2-5.3.2 Reduce Volatile Organic Compounds (VOC)(Low-Emitting Materials)]

Existing Buildings
Section 3-5 Enhance Indoor Environmental Quality [3-5.3.2 Reduce Volatile Organic Compounds (VOC)(Low-Emitting Materials)]

Fitwel v2.1
Workplace Scorecards

Indoor Environments
  6.3 Indoor Air Quality (IAQ) Policy
  6.4 Indoor Air Quality (IAQ) Testing
  6.5 Indoor Air Quality (IAQ) Testing Results
  6.6 Green Purchasing Policy

Commercial Site Scorecard

Site Management
  4.3 Green Purchasing Policy

Buildings Design
  5.4 Building Design Guidelines
  5.5 Building Operational Guidelines

Environmental Policies and Procedures
  6.2 Heat Island Mitigation
  6.5 Idle Reduction
  6.6 Air Quality
  6.7 Air Quality Testing
  6.8 Air Quality Results

Site Safety
  11.3 Construction Safety

Green Globes EB (2023) and NC (2021)

New Construction
6.2.1 Volatile Organic Compounds

Existing Buildings
6.1.4.3 Is there a policy and procedure for maintaining the air quality that includes the following components:

  • Using low-emitting products and materials that have conforming VOC content limits and low VOC emissions for maintenance and cycle renovations?
GSA PBS-P100 (2024)
3.5 Interior Construction and Interior Finishes Performance Attributes
5.2 Mechanical Performance Attributes
5.2.5 Ventilation: 3 Tiers include low emitting materials requirements
LEED v4.1

BD+C, Residential BD+C, ID+C
Indoor Environmental Quality
  Credit: Low-Emitting Materials

O+M
Indoor Environmental Quality
  Prerequisite: Green Cleaning Policy
  Credit: Indoor Environmental Quality Performance
  Credit: Green Cleaning
Materials and Resources
  Prerequisite: Facility Maintenance and Renovations Policy
  Credit: Purchasing

WELL v2

Air Features
A01 Air Quality Standards (Precondition)
A05 Enhanced Air Quality (Optimization)

Materials Features
X11 Cleaning Products and Protocol (Optimization)
X06 VOC Restrictions (Optimization)

Air Quality and Plants
GP IV. Enhance the Indoor Environment: Occupant Health and Wellness

NC&M Criteria 4.9; EB Criteria 4.9

DoD UFC 1-200-02 (Dec 2020)

New Construction
Section 2-5 Enhance Indoor Environmental Quality [2-5.4 Occupant Health and Wellness]

Existing Buildings
Section 3-5 Enhance Indoor Environmental Quality [3-5.4 Occupant Health and Wellness]
Appendix B - Best Practices [B-3.3 Connection to Nature]

Fitwel v2.1
Workplace Scorecards

Outdoor Spaces
  3.1 Outdoor Space Amenities
  3.4 Restorative Garden
  3.6 Fruit and Vegetable Garden

Indoor Environments
  7.2 Views of Nature

Commercial Site Scorecard

Site Composition and Location
  1.7 Open Space Preservation

Outdoor Spaces
  3.1 Outdoor Space Amenities
  3.6 Restorative Garden
  3.7 Fruit and Vegetable Garden
  3.9 Street Trees

Buildings Design
  5.4 Building Design Guidelines
  5.5 Building Operational Guidelines

LEED v4.1

BD+C & ID+C (except Schools, Homes, and Midrise), O+M (except Schools), LEED for Schools, LEED for Homes and Midrise
Innovation
  Pilot: Local Food Production

BD+C, Residential BD+C, ID+C
Innovation
  Pilot: Designing with Nature, Biophilic Design for the Indoor Environment

WELL v2

Air Features
N12 Food Production (Optimization))

Mind Features
M02 Nature and Place (Optimization)

Air Quality in Occupied Buildings under Construction
GP IV. Enhance the Indoor Environment: Indoor Air Quality during Construction and Operations

NC&M Criteria 4.6; EB Criteria 4.6

ASHRAE 189.1 (2020)

Chapter 10

10.3.1.5 IAQ Construction Management

10.3.1.7 Construction Activity Pollution Prevention: Idling of Construction Vehicles

10.3.1.8 Construction Activity Pollution Prevention: Protection of Occupied Areas

DoD UFC 1-200-02 (Dec 2020)

New Construction
Section 2-5 Enhance Indoor Environmental Quality [2-5.3.3 Protect Indoor Air Quality during Construction]

Existing Buildings
Section 3-5 Enhance Indoor Environmental Quality [3-5.3.3 Protect Indoor Air Quality during Construction]
Appendix B Best Practices [B-2.1 IAQ for Work in Existing Buildings]

Fitwel v2.1
Workplace Scorecards

Indoor Environments
  6.2 Asbestos-Safe Property
  6.3 Indoor Air Quality (IAQ) Policy
  6.4 Indoor Air Quality (IAQ) Testing
  6.5 Indoor Air Quality (IAQ) Testing Results

Commercial Site Scorecard

Buildings Design
  5.4 Building Design Guidelines
  5.5 Building Operational Guidelines

Environmental Policies and Procedures
  6.6 Air Quality
  6.7 Air Quality Testing
  6.8 Air Quality Results

Site Safety
  11.3 Construction Safety

Green Globes EB (2023) and NC (2021)

New Construction
6.2 Source Control and Measurement of Indoor Pollutants
6.2.2 Pre-Occupancy Indoor Air Quality Testing

Existing Buildings
6.1.3 Control of Pollutants at Source

LEED v4.1

BD+C, ID+C
Interior Environmental Quality
  Credit: Construction Indoor Air Quality Management
Innovation
  Pilot: Clean Construction
  Pilot: Performance-based Indoor Air Quality Design and Assessment

Residential BD+C
Innovation
  Pilot: Clean Construction

O+M
Materials and Resources
  Prerequisite: Facility Maintenance and Renovations Policy

WELL v2

Air Features
A04 Construction Pollution Management (Precondition)

Chemical Exposure from Pest Management Programs
GP IV. Enhance the Indoor Environment: Integrated Pest Management

NC&M Criteria 4.8; EB Criteria 4.8

DoD UFC 1-200-02 (Dec 2020)

New Construction
Section 3-5 Enhance Indoor Environmental Quality [3-5.3.3 Integrated Pest Management]

Fitwel v2.1
Workplace Scorecards

Indoor Environments
  6.6 Green Purchasing Policy
  6.7 Chemical Storage Ventilation
  6.8 Integrated Pest Management

Commercial Site Scorecard

Site Management
  4.2 Integrated Pest Management
  4.3 Green Purchasing Policy

Buildings Design
  5.5 Building Operational Guidelines

Site Safety
  11.3 Construction Safety
  11.5 Chemical Storage
  11.6 Hazardous Waste Management

Green Globes EB (2023) and NC (2021)

New Construction
6.2.5 Pest and Contamination Control

Existing Buildings
6.3.2 Integrated Pest Management

GSA PBS-P100 (2024)
2.5.8 Operations and Maintenance
2.5.8.1 Sustainable Site Maintenance
LEED v4.1
O+M
Indoor Environmental Quality
  Credit: Integrated Pest Management (IPM)
WELL v2

Materials Features
X10 Pesticide Management and Pesticide Use (Optimization)

Daylight and Circadian Rhythm
GP IV. Enhance the Indoor Environment: Daylighting and Lighting Controls

NC&M Criteria 4.2; EB Criteria 4.2

ASHRAE 189.1 (2020)

Chapter 8

8.3.8 Occupant Override

8.4.1 Daylighting

8.5.1 Daylight Simulation

DoD UFC 1-200-02 (Dec 2020)

New Construction
Section 2-5 Enhance Indoor Environmental Quality [2-5.2 Daylighting and Lighting Controls]

Existing Buildings
Section 2-5 Enhance Indoor Environmental Quality [3-5.2 Daylighting and Lighting Controls]
Appendix C: Projects Impacting a Historic Building or District [C-1.4 Daylighting]

Fitwel v2.1
Workplace Scorecards

Outdoor Spaces
  3.1 Outdoor Space Amenities
  3.4 Restorative Garden

Workspaces
  7.1 Access to Daylight
  7.2 Views of Nature

Commercial Site Scorecard

Outdoor Spaces
  3.1 Outdoor Space Amenities
  3.6 Restorative Garden

Buildings Design
  5.4 Building Design Guidelines

Environmental Policies and Procedures
  6.3 Light Pollution Mitigation

Green Globes EB (2023) and NC (2021)

New Construction
6.3.1 Daylighting and Views

Existing Buildings
6.4.1 Daylighting and Electrical Lighting

GSA PBS-P100 (2024)
3.10.2 Health and Comfort: Environmental Controls
3.10.2.2 Lighting/Daylighting
6.1 Lighting Performance Requirements
6.1.1 Lighting Quality - Interior
6.2 Lighting Performance Attributes
6.2.1 Lighting Quality
LEED v4.1
Residential BD+C
Indoor Environmental Quality
  Credit: Daylight
Innovation
  Pilot: Daylight in nonregularly occupied spaces
WELL v2

Light Features
L01 Light Exposure (Precondition)
L03 Circadian Lighting Design (Optimization)
L04 Electric Light Glare Control (Optimization)
L05 Daylight Design Strategies (Optimization)
L06 Daylight Simulation (Optimization)

Diet
GP IV. Enhance the Indoor Environment: Occupant Health and Wellness (Healthy Dining Options)

NC&M Criteria 4.9; EB Criteria 4.9

DoD UFC 1-200-02 (Dec 2020)

New Construction
Section 2-5 Enhance Indoor Environmental Quality [2-5.4 Occupant Health and Wellness]

Existing Buildings
Section 3-5 Enhance Indoor Environmental Quality [3-5.4 Occupant Health and Wellness]

Fitwel v2.1
Workplace Scorecards

Outdoor Spaces
  3.5 Farmers Market
  3.6 Crop Share Drop-Off

Cafeterias and Prepared Food Retail
  10.1 Healthy Food and Beverage Policy for Prepared Food Areas
  10.2 Choice Architecture Practices
  10.3 Pricing Incentives

Vending Machines and Snack Bars
  11.1 Healthy Food and Beverage Policy for Vending Machines and Snack Bars
  11.2 Choice Architecture Practices for Vending Machines and Snack Bars
  11.3 Pricing Incentives for Vending Machines and Snack Bars

Commercial Site Scorecard

Healthy Food Access
  10.1 Healthy Food and Beverage Policy
  10.2 Healthy Food and Beverage Practices
  10.3 Farmers Market
  10.4 Crop Share Drop-Off
  10.5 Healthy Vending Machine and Snack Bar Policy
  10.6 Healthy Vending Machine & Snack Bar Practices

LEED v4.1
BD+C & ID+C (except Schools, Homes, and Midrise), O+M (except Schools), LEED for Schools, LEED for Homes and Midrise
Innovation
  Pilot: Local Food Production
WELL v2

Nourishment Features
N01 Fruits and Vegetables (Precondition)
N02 Nutritional Transparency (Precondition)
N03 Refined Ingredients (Optimization)
N04 Food Advertising (Optimization)
N05 Artificial Ingredients (Optimization)
N06 Portion Sizes (Optimization)
N07 Nutrition Education (Optimization)
N08 Mindful Eating (Optimization)
N09 Special Diets (Optimization)
N10 Food Preparation (Optimization)
N11 Responsible Food Sourcing (Optimization)
N12 Food Production (Optimization)
N13 Local Food Environment (Optimization)
N14 [βeta] Red and Processed Meats (Optimization)

Diet
GP IV. Enhance the Indoor Environment: Occupant Health and Wellness (Potable Water)

NC&M Criteria 4.9; EB Criteria 4.9

Fitwel v2.1
Workplace Scorecards

Water Supply
  9.1 Universally Accessible Water Supply
  9.2 Water Bottle Refilling Station
  9.3 Water Quality

Cafeterias and Prepared Food Retail
  10.4 Water Access

Vending Machines and Snack Bars
  11.4 Water Access

Commercial Site Scorecard

Water Access
  9.1 Universally Accessible Water Supply
  9.2 Water Bottle Refilling Station
  9.3 Water Quality

Green Globes EB (2023) and NC (2021)

Existing Buildings
6.7.1 Access to Potable Water
6.7.2.3.4 Provides access to free sources of drinking water

LEED v4.1

BD+C, ID+C
Innovation
  Pilot: Lead Risk Reduction
  Pilot: PBT Source Reduction - Lead, Cadmium and Copper

O+M, Residential BD+C
Innovation
  Pilot: Lead Risk Reduction

WELL v2

Water Features
W01 Water Quality Indicators (Precondition)
W02 Drinking Water Quality (Precondition)
W03 Basic Water Management (Precondition)
W04 Enhanced Water Quality (Optimization)
W05 Drinking Water Quality Management (Optimization)
W06 Drinking Water Promotion (Optimization)

Exercise
GP IV. Enhance the Indoor Environment: Occupant Health and Wellness (Stairwell Vertical Circulation)

NC&M Criteria 4.9; EB Criteria 4.9

DoD UFC 1-200-02 (Dec 2020)

New Construction
Section 2-5 Enhance Indoor Environmental Quality [2-5.4 Occupant Health and Wellness]

Existing Buildings
Section 3-5 Enhance Indoor Environmental Quality [3-5.4 Occupant Health and Wellness]
Appendix B: Best Practices [B-3.2 Promoting Voluntary Physical Activity]

Fitwel v2.1
Workplace Scorecards

Stairs
  5.1 Stair Access
  5.2 Stair Location
  5.3 Stair Design
  5.4 Stair Signage
  5.5 Stair Visibility
  5.6 Stair Safety

Commercial Site Scorecard

Buildings Design
  5.4 Buildings Design Guidelines

GSA PBS-P100 (2024)
3.4.3 Promote the Use of Stairs
LEED v4.1
BD+C, ID+C, O+M, Residential BD+C
Innovation
  Pilot: Design for Active Occupants
WELL v2

Movement Features
V01 Active Buildings and Communities (Precondition)
V03 Circulation Network (Optimization)

Exercise
GP IV. Enhance the Indoor Environment: Occupant Health and Wellness (Active Workstations)

NC&M Criteria 4.9; EB Criteria 4.9

DoD UFC 1-200-02 (Dec 2020)

New Construction
Section 2-5 Enhance Indoor Environmental Quality [2-5.4 Occupant Health and Wellness]

Existing Buildings
Section 3-5 Enhance Indoor Environmental Quality [3-5.4 Occupant Health and Wellness]
Appendix B: Best Practices [B-3.1 Sit-Stand Workstations]

Fitwel v2.1
Workplace Scorecards

Workspaces
  7.4 Active Workstations

LEED v4.1
BD+C, ID+C, O+M, Residential BD+C
Innovation
  Pilot: Ergonomics approach for computer users.
WELL v2

Movement Features
V02 Ergonomic Workstation Design (Precondition)
V07 Active Furnishings (Optimization)
V11 [Beta] Ergonomics Programming (Optimization)

Exercise
GP IV. Enhance the Indoor Environment: Occupant Health and Wellness (Access to Bicycle Commuter Facilities)

NC&M Criteria 4.9; EB Criteria 4.9

ASHRAE 189.1 (2020)

Chapter 5

5.3.7.1.2 Bicycle Paths

5.3.7.2 Bicycle Parking

DoD UFC 1-200-02 (Dec 2020)

New Construction
Section 2-5 Enhance Indoor Environmental Quality [2-5.4 Occupant Health and Wellness]

Existing Buildings
Section 3-5 Enhance Indoor Environmental Quality [3-5.4 Occupant Health and Wellness]
Appendix B: Best Practices [B-3.2 Promoting Voluntary Physical Activity]

Fitwel v2.1
Workplace Scorecards

Building Access
  2.3 Bicycle Parking
  2.4 Active Commuter Showers

Commercial Site Scorecard

Access
  2.3 Bike Lanes
  2.5 Bicycle Parking

Green Globes EB (2023) and NC (2021)

New Construction
2.2.1.5 Is a bicycle parking rack located within 50ft of an entrance?
2.2.1.6.1 Is sheltered bicycle parking provided?
2.2.1.6.2 Are at least 50% of sheltered bicycle parking located inside building or within storage lockers or another area that provides security of a locked room or cage?

Existing Buildings
2.2.2.5 Providing bicycle facilities for min 5% of occupants

LEED v4.1

BD+C NC, Residential BD+C, ID+C
Location and Transportation
  Credit: Bicycle Facilities
Transportation and Land Use
  Credit: Access to Quality Transit

LEED for Communities, LEED for Cities
Transportation and Land Use
  Credit: Access to Quality Transit
  Credit: Smart Mobility and Transportation Policy
  Credit: Walkability and Bikeability

O+M
Location and Transportation
  Credit: Transportation Performance

WELL v2

Movement Features
V04 Facilities for Active Occupants (Optimization)

Exercise
GP I. Employ Integrated Design Principles: Integrated Design and Management (Mass Transit/Public Transportation Access & Walkability)

NC&M Criteria 1.1; EB Criteria 1.1

ASHRAE 189.1 (2020)

Chapter 5

5.3.7 Mitigation of Transportation Impacts

DoD UFC 1-200-02 (Dec 2020)

New Construction
Section 2-2 Employ Integrated Design Principles [2-2.1.4 Site Integration and Design of Building]

Fitwel v2.1
Workplace Scorecards

Location
  1.1 - 1.3 Walkability
  1.4 Proximity to Transit

Building Access
  2.1 Pedestrian Route to Transit
  2.2 Commuter Survey
  2.3 Bicycle Parking
  2.4 Active Commuter Shower
  2.5 Incentivizing Transit
  2.6 Efficiency Parking

Entrances and Ground Floor
  4.2 Main Pedestrian Entrance
  4.3 Main Entrance Amenities
  4.5 Publicly Accessible Use
  4.6 Activate Pedestrian Areas
  4.7 Local Amenities Display

Commercial Site Scorecard

Site Composition and Location
  1.1 Transit Access
  1.2 Community Destinations
  1.3 Pedestrian Network
  1.4 Efficient Parking
  1.5 Brownfield Remediation
  1.6 Infill Development
  1.7 Open Space Preservation
  1.8 Project Location

Site Access
  2.1 Universal Accessibility
  2.2 Transit Stops
  2.3 Bicycle Lanes
  2.4 Commuter Survey
  2.5 Bicycle Parking
  2.6 Wayfinding

Buildings Design
  5.4 Building Design Guidelines

Green Globes EB (2023) and NC (2021)

New Construction
2.2.1 Transportation

Existing Buildings
2.2.2.2 What is the distance along public sidewalks and bike lanes/paths to the closest public transit stop?
2.2.2.4 Is there a public or private transit service within 0.5 miles for building users at reduced cost?
2.2.2.6 Have other measures been enacted to reduce car dependency?

GSA PBS-P100 (2024)
2.1 Community Planning Performance Table
2.1.1 Sustainable Locations
2.2.1 Sustainable Locations
LEED v4.1

BD+C, Residential BD+C, ID+C
Location and Transportation
  Credit: Bicycle Facilities
Transportation and Land Use
  Credit: Access to Quality Transit

LEED for Communities, LEED for Cities
Transportation and Land Use
  Credit: Access to Quality Transit
  Credit: Smart Mobility and Transportation Policy
  Credit: Walkability and Bikeability

O+M
Location and Transportation
  Credit: Transportation Performance

WELL v2

Movement Features
V01 Active Buildings and Communities (Precondition)
V05 Site Planning and Selection (Optimization)

Exposure to Radon
GP IV. Enhance the Indoor Environment: Radon Mitigation

NC&M Criteria 4.4; EB Criteria 4.4

ASHRAE 189.1 (2020)

Chapter 8

8.3.4 Soil-Gas Control: Soil-gas entry into enclosed spaces that are immediately above crawlspaces, slabs-on-grade, and basement slabs shall be controlled in accordance with sections 8.3.4.1 or 8.3.4.2

Chapter 10

10.3.1.9 Soil-Gas Control: The building shall be tested, postconstruction, for radon in accordance with ANSI/AARST MALB. The indoor radon concentration shall be below 2.7 pCi/L

Green Globes EB (2023) and NC (2021)

New Construction
6.2.6 Other Indoor Pollutants (Tobacco, Radon)

Existing Buildings
6.2.2 Radon

GSA PBS-P100 (2024)
3.3.3 Substructure: depressurization required when radon is present
LEED v4.1
Residential BD+C
Indoor Environmental Quality
  Prerequisite: Radon-Resistant Construction
WELL v2

Air Features
A01 Fundamental Air Quality (Precondition)

General Health & Wellness
GP I. Employ Integrated Design Principles: Integrated Design and Management (Integrated team approach)

NC&M Criteria 1.1; EB Criteria 1.1

ASHRAE 189.1 (2020)

Informative Appendix F: Integrated Design

DoD UFC 1-200-02 (Dec 2020)

New Construction
Section 2-2 Employ Integrated Design Principles [2-2.1.4 Site Integration and Design of Building]

Existing Buildings
Section 3-2 Employ Integrated Assessment, Operation, and Management Principles [3-2.1 Integrated Assessment, Operation, and Management]

Fitwel v2.1
Workplace Scorecards

Shared Spaces
  8.12 Occupant Satisfaction Survey
  8.13 Stakeholder Collaboration Process

Commercial Site Scorecard

Community Relations
  7.2 Employment Practices
  7.3 Stakeholder Collaboration Process

Shared Site Amenities
  8.3 Occupant Satisfaction Survey

Green Globes EB (2023) and NC (2021)

New Construction
1.1.2 Integrated Design Process

Existing Buildings
1.1.1 Environmental Management System documentation

GSA PBS-P100 (2024)

1.9.3 Sustainability Requirements

LEED v4.1

BD+C, ID+C
  Credit: Integrative Process

Residential BD+C
  Credit: Integrative Process

BD+C, ID+C, O+M
Innovation
  Pilot: Integrative Process for Health Promotion

O+M
Innovation
  Pilot: Integrative Process

WELL v2

Community Features
C02 Integrative Design (Precondition)

Potential Exposure and Risk to Occupants
GP V. Reduce the Environmental Impact of Materials: Products

NC&M Criteria 5.3; EB Criteria 5.3

ASHRAE 189.1 (2020)

Chapter 9

9.4.1 Reduced impact Materials

9.5.1 Life-Cycle Assessment (LCA)

DoD UFC 1-200-02 (Dec 2020)

New Construction
Section 2-6 Reduce Environmental Impact of Materials [2-6.1 Environmentally Preferable Products]

Existing Buildings
Section 3-6 Reduce Environmental Impact of Materials [3-6.1 Environmentally Preferable Products]
Appendix B: Best Practices [B-5 Other Sustainable Products]

Fitwel v2.1
Workplace Scorecards

Indoor Environments
  6.3 Indoor Air Quality Policy
  6.4 Indoor Air Quality Testing
  6.5 Indoor Air Quality Testing Results
  6.6 Green Purchasing Policy
  6.7 Chemical Storage Ventilation

Entrances and Ground Floor
  4.8 Entryway Systems

Commercial Site Scorecard

Site Management
  4.3 Green Purchasing Policy

Buildings Design
  5.5 Building Operational Guidelines

Green Globes EB (2023) and NC (2021)

Existing Buildings
5.1.2 Environmental Purchasing

GSA PBS-P100 (2024)
3.5 Interior Construction Performance Table [many specific materials requirements by building component (recycled, biobased, etc.), too numerous to list]
3.6 Interior Construction Performance Attributes
LEED v4.1

BD+C, ID+C
Materials and Resources
  Credit: Building Product Disclosure and Optimization - Environmental Product Declarations
  Credit: Building Product Disclosure and Optimization - Raw Materials
  Credit: Building Product Disclosure and Optimization - Material Ingredients
Innovation
  Pilot: Integrative Analysis of Building Materials
  Pilot: Building Material Human Hazard & Exposure
Assessment
  Pilot: Certified Multi-attribute Products and Materials
  Pilot: Timber Traceability

Residential BD+C
Materials and Resources
  Credit: Environmentally Preferable Materials
Innovation
  Pilot: Legal Wood
  Pilot: Building Material Human Hazard & Exposure Assessment
  Pilot: Timber Traceability

O+M
Materials and Resources
  Prerequisite: Purchasing Policy
  Credit: Purchasing

WELL v2

Materials Features
X06 VOC Restrictions (Optimization)
X07 Materials Transparency (Optimization)
X08 Materials Optimization (Optimization)
X11 Cleaning Products and Protocols (Optimization)

Smoking Reduction / Cessation
GP IV. Enhance the Indoor Environment: Environmental Smoking Control

NC&M Criteria 4.7; EB Criteria 4.7

ASHRAE 189.1 (2020)

Chapter 8

8.3.1.7 Environmental Tobacco Smoke

DoD UFC 1-200-02 (Dec 2020)

New Construction
Section 2-5 Enhance Indoor Environmental Quality [2-5.3.4 Environmental Tobacco Smoke Control]

Existing Buildings
Section 3-5 Enhance Indoor Environmental Quality [3-5.3.4 Environmental Tobacco Smoke Control]

Fitwel v2.1
Workplace Scorecards

Outdoor Spaces
  3.8 Tobacco- and Smoke-Free Outdoor Spaces

Entrances and Ground Floor
  4.1 Tobacco- and Smoke-Free Signage

Indoor Environment
  6.1 Tobacco- and Smoke-Free Environment

Commercial Site Scorecards

Outdoor Spaces
  3.8 Tobacco- and Smoke-Free Outdoor Spaces

Buildings Designs
  5.1 Tobacco- and Smoke-Free Signage
  5.5 Building Operational Guidelines

Green Globes EB (2023) and NC (2021)

New Construction
6.2.6 Other Indoor Pollutants (Tobacco, Radon)

Existing Buildings
6.1.3 Control of Pollutants at Source

LEED v4.1

BD+C, ID+C, O+M
Indoor Environmental Quality
  Prerequisite: Environmental Tobacco Smoke Control

Residential BD+C Indoor Environmental Quality
  Prerequisite: Environmental Tobacco Smoke Control
  Credit: No Environmental Tobacco Smoke

WELL v2

Air Features
A02 Smoke-Free Environment (Precondition)

Mind Features
M10 Tobacco Cessation (Optimization)

Views of Nature
GP IV. Enhance the Indoor Environment: Occupant Health and Wellness

NC&M Criteria 4.9; EB Criteria 4.9

DoD UFC 1-200-02 (Dec 2020)

Appendix B: Best Practices [B-3.3 Connection to Nature]

Fitwel v2.1
Workplace Scorecards

Workspaces
  7.2 Views of Nature

Commercial Site Scorecard

Outdoor Spaces
  3.9 Street Trees

Buildings Design
  5.4 Building Design Guidelines

GSA PBS-P100 (2024)
1.9.1.4 Fenestration
1.9.2.4 Designing for Daylight
6.2.1 Lighting Quality
LEED v4.1

BD+C, ID+C
Indoor Environmental Quality
  Credit: Quality Views
Innovation
  Pilot: Designing with Nature, Biophilic Design for the Indoor Environment

Residential BD+C
Indoor Environmental Quality
  Credit: Daylight and Quality Views
Innovation
  Pilot: Designing with Nature, Biophilic Design for the Indoor Environment
  Pilot: Quality Views in Nonregularly Occupied Spaces

 

WELL v2

Mind Features
M02 Nature and Place (Precondition)