Environmental Programs
Environmental purchasing programs help federal buyers identify products and services that have a smaller or reduced negative effect on the environment and human health. Federal agencies are required to buy sustainable products and services to the maximum extent practicable. Sustainable products and services means products and services that are subject to and meet the applicable statutory purchasing programs and required Environmental Protection Agency purchasing programs listed below.
The Green Procurement Compilation consolidates information on these programs in one location, including applicable products, relevant legal requirements, and more, making it easy for buyers to identify each program that applies to a specific product or service.
Learn More About These Programs Below
Related Topics
BioPreferred
The U.S. Department of Agriculture (USDA) manages the BioPreferred program. BioPreferred includes both a preferential procurement program for Federal agencies and their contractors and a voluntary labeling program for the broad scale consumer. Under the Federal procurement preference program, USDA designates categories of biobased products. Federal agencies and their contractors are then required to give preferential consideration to biobased products in the designated BioPreferred product categories when making purchases. As a part of the designation process, USDA establishes the minimum biobased content for the category. The technical, health, and environmental characteristics of these products are also considered. BioPreferred products are required under FAR 23.103.
Buying BioPreferred products? Review FAR provision 52.223-1
, and clauses 52.223-2 and 52.223-23 for applicability. Note: Federal agencies are directed to prioritize items that are both CPG and BioPreferred; however, in instances when federal agencies must choose between the two programs, and both items meet the agency's needs, federal agencies are directed to procure the CPG item.
Visit Program Site: BioPreferred
View BioPreferred products on the GPC
Comprehensive Procurement Guidelines (CPG) Program
Under the Comprehensive Procurement Guideline (CPG) program, the U.S. Environmental Protection Agency (EPA) designates products that are or can be made with recovered materials, and recommends practices for buying these products. Once a product is designated, procuring federal agencies are required to purchase it with the highest recovered material content level practicable. Buying recycled content products helps to ensure that the materials collected in home and office recycling programs will be used again in the manufacturing of new products. CPG products are required under FAR 23.103.
Buying CPG products? Review FAR provision 52.223-4 and clauses 52.223-9 and 52.223-23 for applicability. Note: Federal agencies are directed to prioritize items that are both CPG and BioPreferred; however, in instances when federal agencies must choose between the two programs, and both items meet the agency's needs, federal agencies are directed to procure the CPG item.
Visit Program Site: EPA CPG
ENERGY STAR Products
ENERGY STAR is a joint program of the U.S. Environmental Protection Agency (EPA) and the U.S. Department of Energy (DOE). The ENERGY STAR label helps consumers identify energy efficient products and practices in over 60 product categories for the home and office. Products earn the ENERGY STAR label by meeting the energy efficiency requirements set forth in ENERGY STAR product specifications. These products deliver the same or better performance as comparable models while using less energy and saving money. ENERGY STAR products are required under FAR 23.103.
Buying ENERGY STAR products? Review clause 52.223-23 for applicability.
Visit Program Site: ENERGY STAR
View Energy Star products on the GPC
EPA Recommendations of Specifications, Standards, and Ecolabels
The EPA Environmentally Preferable Purchasing (EPP) Program helps Federal agencies identify and procure environmentally preferable products and services to meet zero emissions and other sustainable procurement goals by providing Recommendations of Specifications, Standards, and Ecolabels. The EPP recommendations leverage private sector approaches to defining and measuring sustainability and give preference to multi-attribute or life-cycle based standards and ecolabels that address key environmental and human health impact areas and where product conformance is determined by a competent third-party certification body. EPA Recommendations are required under FAR 23.103.
Review clause 52.223-23 for applicability.
Visit Program Site: EPA Recommendations of Specifications, Standards, and Ecolabels for Federal Purchasing
View EPA Recommendations on the GPC
Federal Energy Management Program (FEMP)
The U.S. Department of Energy’s Federal Energy Management Program (FEMP) sets minimum energy efficiency requirements for product categories that have the potential to generate significant Federal energy savings. FEMP does not purchase, recognize, endorse, or otherwise identify specific energy-efficient products for Federal procurement. Instead, FEMP identifies energy efficiency requirements for a category of products, which is typically an energy consumption level within the upper 25% of the product category. Products that meet FEMP-designated efficiency requirements are in the upper 25% of their class in energy efficiency and may be assumed to be life cycle cost effective. FEMP-designated products are required by FAR 23.103.
Buying FEMP products? Review clause 52.223-23 for applicability.
Visit Program Site: FEMP
Federal Energy Management Program (FEMP) Low-Standby Power
The U.S. Department of Energy’s Federal Energy Management Program (FEMP) maintains a list of products that meet FEMP-designated standby power requirements. These are electronic products that consume electricity even when they appear to be turned off. For many product categories, the ENERGY STAR program considers standby energy use. However, for certain product categories identified by FEMP, Federal buyers must ensure that purchases meet both ENERGY STAR and low standby power requirements. Electronic products not listed by FEMP must meet a standby power level of 1 watt or less unless such a product is not available or is not cost effective in the intended application. In that case, the buyer should seek a product with the lowest standby power level available. FEMP low-standby power products are required by FAR 23.103.
Buying FEMP Low-Standby Power products? Review clause 52.223-23 for applicability.
Visit Program Site: FEMP Low-Standby Power
View FEMP Low-Standby Power products on the GPC
Safer Choice
EPA's new Safer Choice label helps consumers and commercial buyers identify and select products with safer chemical ingredients, without sacrificing quality or performance. When you see the Safer Choice label on a product, it means that every ingredient in the product has been evaluated by EPA scientists against stringent health and safety standards. Look for the label on a variety of chemical-based products, such as all-purpose cleaners, laundry detergents, and carpet and floor care products. Safer Choice products are required under FAR 23.103.
Buying Safer Choice products? Review clause 52.223-23 for applicability.
Visit Program Site: Safer Choice
View Safer Choice products on the GPC
Significant New Alternatives Policy (SNAP)
The Significant New Alternatives Policy (SNAP) Program is the U.S. Environmental Protection Agency’s (EPA's) program to evaluate and regulate substitutes for the ozone-depleting chemicals that are being phased out under the stratospheric ozone protection provisions of the Clean Air Act. Under the SNAP Program, EPA publishes a list of acceptable and unacceptable substitutes for ozone-depleting substances based on a specific product end-use. Substitutes are reviewed on the basis of ozone depletion potential, flammability, toxicity, occupational health and safety, as well as contributions to global warming and other environmental factors. Acceptable substitutes have been determined to reduce overall risk to human health and the environment. The SNAP Program does not endorse specific products manufactured by specific companies. SNAP substitutes are required by FAR 23.103.
Buying SNAP products? Review clause 52.223-11, 52.223-12, 52.223-20, 52.223-21, and 52.223-23 for applicability.
Visit Program Site: SNAP
The Significant New Alternatives Policy (SNAP) Program is the U.S. Environmental Protection Agency’s (EPA's) program to evaluate and regulate substitutes for the ozone-depleting chemicals that are being phased out under the stratospheric ozone protection provisions of the Clean Air Act. Under the SNAP Program, EPA publishes a list of acceptable and unacceptable substitutes for ozone-depleting substances based on a specific product end-use. Substitutes are reviewed on the basis of ozone depletion potential, flammability, toxicity, occupational health and safety, as well as contributions to global warming and other environmental factors. Acceptable substitutes have been determined to reduce overall risk to human health and the environment. The SNAP Program does not endorse specific products manufactured by specific companies.
The Significant New Alternatives Policy (SNAP) Program is the U.S. Environmental Protection Agency’s (EPA's) program to evaluate and regulate substitutes for the ozone-depleting chemicals that are being phased out under the stratospheric ozone protection provisions of the Clean Air Act. Under the SNAP Program, EPA publishes a list of acceptable and unacceptable substitutes for ozone-depleting substances based on a specific product end-use. Substitutes are reviewed on the basis of ozone depletion potential, flammability, toxicity, occupational health and safety, as well as contributions to global warming and other environmental factors. Acceptable substitutes have been determined to reduce overall risk to human health and the environment. The SNAP Program does not endorse specific products manufactured by specific companies.
WaterSense
WaterSense, a partnership program of the U.S. Environmental Protection Agency (EPA), seeks to help consumers make smart water choices that save money and maintain high environmental standards without compromising performance. Independent, third-party licensed certifying bodies certify that products meet EPA criteria for water-efficiency and performance by following testing and certification protocols specific to each product category. Products and services that have earned the WaterSense label have been certified to be at least 20% more efficient without sacrificing performance. WaterSense products are required under FAR 23.103.
Buying WaterSense products? Review clause 52.223-23 for applicability.
Visit Program Site: WaterSense
