Composite Panels
Last Updated: 06/29/24
Click to see brand name products that meet these requirements
Engineered products designed for use in structural walls, curtain walls, floors and flat roofs in commercial buildings.
Product Details
To the maximum extent practicable, federal agencies are required to buy sustainable products, which are products that meet the purchasing program(s) listed below.
If there is more than one program listed below, agencies are directed to prioritize multi-attribute products, which meet statutory purchasing program requirements (
) and one or more required Environmental Protection Agency purchasing programs.
Review our frequently asked questions for more information.
|
Product Type
|
Procurement Info
|
Where to Buy
|
|---|---|---|
| Acoustical |
|
|
| Interior Panels |
|
|
| Plastic Lumber |
|
|
| Structural Interior Panels |
|
|
| Structural Wall Panels |
|
|
| Countertops |
|
.jpg)
USDA BioPreferred® Program
CPG
Cradle to Cradle Certified (C2C) (Addresses PFAS)
Ecologo/UL 2818 GREENGUARD Certification
SCS Indoor Advantage Gold
Intertek Clean Air Gold Certification
VOC Green Certification Program
Legal Requirements
Lists federal requirements related to the purchase of this item, including applicable Federal Acquisition Regulation (FAR) requirements
Guiding Principles
Contributes to meeting The Guiding Principles for Sustainable Federal Buildings
Additional Guidance
Federal Programs
According to BioPreferred, composite panels have the following product types and can be described as:
- Acoustical - Engineered products designed for use as structural and sound deadening material suitable for office partitions and doors.
- Countertops-A solid work surface found in residential, commercial or industrial setting. Products may be used in but not limited to kitchens or other food preparation areas, bathrooms or lavatories, and workrooms in general
- Interior Panels - Engineered products designed specifically for interior applications and providing a surface that is impact-, scratch-, and wear-resistant and that does not absorb or retain moisture.
- Plastic Lumber - Engineered products suitable for non-structural outdoor needs such as exterior signs, trash can holders, and dimensional letters.
- Structural Interior Panels - Engineered products designed for use in structural construction applications, including cabinetry, casework, paneling, and decorative panels.
- Structural Wall Panels - Engineered products designed for use in structural walls, curtain walls, floors and flat roofs in commercial buildings.
Guiding Principles for Sustainable Federal Buildings
For products such as composite panels, the applicable Guiding Principle for High Performance and Sustainable Buildings depends on what characteristics are included in the product. If it has biobased content it would be GP 5, if it is low-emitting it would be GP 4, if it's both, it would be included in both. "Low emitting" would be any product that has a low emissions or low VOC standard.
Related Workspaces