[Skip to Content]
SFTool has a new login! Please register with Login.gov. To retain your existing SFTool account information (FEDSAT, Total Workplace Scorecards, & GPC Lists), use our MERGE PAGE after logging in to migrate your data.

Lighting

Return to Laboratory

Design Guidance

Overall Strategies

Turning off overhead lighting and using flexible, energy-efficient task lighting over work areas not only saves energy, but can provide a more effective and comfortable lighting source for laboratory users. One risk with task lighting is that it can be inadvertently left by users after leaving the laboratory. Providing visual cues, such as signs or magnets, and verbal reminders when lights are left on will help users to establish good habits around use of task lighting. Learn more about lighting in Whole Building Systems.

 

Lighting Control Software

Lighting can be controlled using comprehensive software that offers some of the following tools. Load shedding controls will turn off nonessential lights when the software notes the electrical load reaching a specified threshold. Task tuning allows the software to respond to occupants' lighting needs based on the type of work being completed.

Best Practices

  • Use daylight sensor controls that turn off electric lighting in response to natural light levels to reduce energy consumption. When used in combination with occupant sensors, a sustainable lighting control program can have significant benefits.
  • Use sustainable lighting practices such as occupant sensors to decrease utility costs.
  • Limit the use of accent lighting to specific artwork, menu boards, and educational items to reduce energy consumption.
  • Incorporate daylighting or views to the outside to create an inviting, ascetically pleasing environment as natural light is usually preferred to artificial lighting.
  • Use direct-indirect lighting to contribute to an efficient lighting system.
  • Use efficient LED lamps as they use less energy, do not give off as much heat as incandescent bulbs, and have a longer useful life.
  • Use efficient LED lighting where practical to reduce energy consumption and maintenance costs.
  • Use controls that dim or turn off electric lighting in response to natural light levels to reduce energy consumption.
  • Skylights and roof monitors allow natural light into a space, reducing the need for electric lighting during daytime hours and allowing full-spectrum light inside.
  • Incorporate daylighting or views to the outside to create an inviting, ascetically pleasing environment as natural light is usually preferred to artificial lighting.
  • Reduce lighting power density in open offices by using an efficient layout of LEDs fixtures, such as direct/indirect fixtures.
  • Vacancy sensors are especially effective in well-lit conference rooms.
  • Increase spacing of fixtures in corridors to conserve energy.
  • Use efficient LED task lighting to reduce energy consumption while providing occupants control of the light levels. Task lighting in general may allow for lower ambient lighting levels.
  • Choose moveable task lighting with a magnetic mount or an articulated arm to provide light where it is needed.
  • Choose high efficiency LEDs for task lighting.
  • Leave overhead light levels low (e.g. 15 foot candles) or off and use task lighting on benches. Make task lighting the primary lighting source, rather than an optional or supplemental source.
  • Talk with lab users about turning off task lights when they are not needed. Provide visual cues, such as signs or magnets on or near task lights, to remind users to turn them off.
  • Use sustainable lighting practices such as occupant sensors to decrease utility costs. For open areas, sensors must be carefully placed to avoid overlap with neighboring areas.
  • Use sustainable lighting practices such as occupant sensors to decrease utility costs. Make sure to use ultrasonic sensors in obstructed rooms such as restrooms.
  • Use sustainable lighting practices such as occupant sensors to decrease utility costs. For spaces such as corridors with unpredictable but frequent use, consider controls which turn electric lighting down 50% or more when no occupants are present instead of turning it off entirely.

Compare Lighting Options

EB = Existing BuildingsNC = New Construction and Major Renovation

Federal Requirements

Guiding Principles