[Skip to Content]

Wood


Description

Wood panel ceilings, like metal ceilings, are not often used in office spaces as they tend to be a high-end finish. Wood panel ceilings do not offer the same acoustical properties as acoustical ceiling tile or drywall ceilings.


Tips

O+M Tips

  • Wood panel systems can be cleaned with microfiber cloths and appropriate Green Seal certified products.
  • Prevent drying by sealing with natural mineral oil.

End of Life Tips

  • If in good condition, materials can be donated to organizations like Habitat for Humanity that will reuse them
  • For materials that are well worn or damaged, recycling is the next best option. Contact the manufacturer for recycling information, or visit Earth911.com to determine the capacity of local facilities.
  • For materials that are well worn or damaged, recycling is the next best option. Contact the countertop manufacturer for recycling information, or visit Earth911.com to determine the capacity of local facilities.

For alignment with LEED Standards

  • Regional Materials: For credit achievement calculation, products sourced (extracted, manufactured, purchased) within 100 miles (160 km) of the project site are valued at 200% of their base contributing cost.
    • BD+C and ID+C MR: Building Product Disclosure and Optimization – Sourcing of Raw Materials and Material Ingredients
    • O+M MR: Purchasing - Facility Maintenance and Renovation
  • At a minimum, 25% of the total cost of all materials and products used in the project must be responsibly extracted using one of the following criteria: extended producer responsibility, bio-based materials, certified wood products, materials reuse, recycled content, or other USGBC approved program.
    • BD+C and ID+C MR: Building Product Disclosure and Optimization - Sourcing of Raw Materials
  • Certified Wood: Wood-based products and materials that are certified in accordance with the Forest Stewardship Council's principles and criteria contribute to a credit.
    • BD+C and ID+C MR: Building Product Disclosure and Optimization - Sourcing of Raw Materials
    • O+M MR: Purchasing - Ongoing
  • Adhesives: Must meet the volatile organic compound (VOC) requirements of South Coast Air Quality Management District (SCAQMD) Rule 1168.
    • BD+C and ID+C EQ: Low-Emitting Materials
    • O+M MR: Purchasing - Facility Maintenance and Renovation