[Skip to Content]

LED Fixtures with Integrated Controls

Last Updated: 10/01/19
LED Fixtures with Integrated Controls

LED Fixtures with integrated advanced lighting controls dynamically determine light levels using onboard occupancy and daylight sensors.

Product Details
Procurement Info

Where to Buy

  • No federal source identified
Life Cycle Cost Savings

Life Cycle Costing (LCC) aims to quantify the financial impact of a product over its entire life cycle to assist consumers in making decisions that will save them money over the long term.

According to GSA's Proving Ground, LED fixtures with integrated advanced lighting controls can achieve lighting energy savings of up to 69% over the GSA average, and yield a 40% return on investment. Reduced maintenance accounts for 25% of cost savings.

Guiding Principles
Contributes to meeting The Guiding Principles for Sustainable Federal Buildings
Additional Guidance

LED Fixtures with integrated advanced lighting controls are recommended for renovations and should be considered for retrofits. GSA's Green Proving Ground recommends prioritizing facilities with minimal lighting controls, lighting energy use > 3.25 kWh/ft2 /yr and utility rates > $.10/kWh (national average).

Potential LEED Contributions

This product may contribute* toward points in multiple LEED v4 rating systems, including areas required for LEED v4 building certification. Primarily, the credits will apply in the Building Design and Construction (BD+C) and Building Operations and Maintenance (O+M) categories. This includes the specialty areas of: New Construction and Major Renovation, Existing Buildings, Core & Shell, Schools, Retail, Data Centers, Warehouse and Distribution Centers, Hospitality, and Healthcare. Specific credits are:

  • Energy & Atmosphere - Optimize Energy Performance
  • Indoor Environmental Quality - Interior Lighting
  • Sustainable Sites - Light Pollution Reduction

* It is important to note that no products, individually or collectively, can guarantee a specific number of points for LEED Category credit. Each credit will need to be matched to the product by a certified professional.